Start Free Book Demo
Built for UK construction teams

Construction water tracking
software

Water is the environmental figure most sites still don't measure properly. VerdCore tracks fresh water use, recycling, discharge, rainwater harvesting and temporary supply across five streams — with a reduction % dashboard and the evidence your discharge consent, BREEAM assessment or water neutrality case needs.

Start for free → Book a demo
Five water streams tracked
Discharge consent evidence
BREEAM Wat 01-04 ready
Free to start
Built around how UK water compliance is actually checked
Discharge Consents Trade Effluent BREEAM Wat 01-04 Water Neutrality
What's included

Everything a UK contractor needs
to track site water

Water reporting is increasingly requested by clients and regulators — here's what actually gets measured.

Five-stream water tracking
Fresh water use, recycled water, discharge, rainwater harvesting and temporary supply — tracked separately, not collapsed into one meter reading.
Reduction % dashboard
See consumption trend against a baseline in real time — the same measured-improvement evidence BREEAM Wat 01 and a water neutrality case both need.
Discharge consent evidence
Log pH and monitoring readings against your consent conditions, so evidence for the Environment Agency or your water company is ready, not reconstructed from a paper log.
BREEAM Wat 01-04 ready data
Measured consumption, monitoring and non-potable source figures — the data your BREEAM assessor needs behind the design-stage calculation.
Water neutrality evidence
The baseline and reduction figures a Water Neutrality Study needs, in water-stressed catchments where every litre of net new demand has to be offset.
Alongside carbon and waste
Water sits alongside your carbon and waste tracking — one set of project data behind every report, not a separate water spreadsheet.
Why switch

Replace the water meter log

Everything you're already trying to track from manual readings and paper consent files, unified into one auditable system.

Spreadsheets
VerdCore
One consumption figure
Five streams tracked separately
Discharge readings on paper
Logged against consent limits
No BREEAM-ready evidence
Wat 01-04 data ready
Water separate from carbon
One dataset
How to start

Three steps to evidenced
water reporting

1
Log across five streams
Fresh use, recycling, discharge, harvesting and temporary supply — entered as readings happen, on site or offline.
2
Track the reduction
A live % reduction against your baseline, plus discharge readings logged against consent limits.
3
Export the evidence
Discharge consent records, BREEAM-ready data, or a water neutrality baseline — ready whenever it's asked for.
Standards covered

Built around the frameworks
your water reporting touches

From day-to-day discharge compliance to the planning-stage water neutrality test.

Discharge consents
Environmental Permitting Regulations consent for discharge to surface water or groundwater.
Trade effluent consent
Water Industry Act 1991 consent for discharge to the foul sewer, including concrete washout.
BREEAM Wat 01-04
Consumption, monitoring, leak detection and water-efficient equipment credits.
Water neutrality
Net zero additional demand in water-stressed catchments, via the reduce-then-offset hierarchy.
Read more

The frameworks behind the software

Plain-English guides to how UK construction water compliance actually works.

Water Neutrality in Planning explained BREEAM Water Credits explained Trade Effluent & Discharge Consents Construction waste tracking software
Questions

Frequently asked questions

What is construction water tracking software?
It logs a site's water activity — fresh water use, recycling, discharge, rainwater harvesting and temporary supply — and turns it into a reduction percentage over time and the evidence needed for discharge consents, BREEAM water credits or a water neutrality case, instead of manual meter readings reconstructed from memory.
Does VerdCore track all my site's water streams?
Yes. VerdCore tracks water across five streams — fresh water consumption, recycled water, discharge, rainwater harvesting and temporary supply — rather than a single consumption figure, so you can see where water is actually being used and saved.
Can VerdCore help with discharge consent compliance?
Yes. VerdCore logs discharge readings and evidence against your consent conditions, so pH and monitoring records are available in one place rather than scattered across paper logs when the Environment Agency, your water company or a client asks for them.
Does VerdCore support BREEAM water credits?
VerdCore's consumption, monitoring and non-potable source tracking gives your BREEAM assessor the measured water data behind the Wat 01-04 issues — consumption reduction, monitoring, leak detection context and water-efficient equipment — rather than a one-off design-stage estimate.
Can VerdCore help with a water neutrality case?
VerdCore tracks the consumption, harvesting and reduction data that a Water Neutrality Study is built on — the baseline and design-case figures behind the offsetting hierarchy — alongside your other environmental reporting rather than in a separate spreadsheet.
Is there a free plan?
Yes. VerdCore is free to start, with a 14-day Pro trial and no card required. Paid plans start from £19/month for firms that need more projects, reports and team seats.

Track water across every stream

Free for two sites, no card. A sample project loads automatically so you can explore the Water Tracker right away. No card required.

Start for free →